Search results

We blew one of our Honda BF90’s over the weekend. As in metal beat spark plug and 0 compression in same cylinder. I am looking to buy for an operational BF90 to salvage our short Alaska fishing season if anyone can help. My lower unit is good. Need a 1999-2006 BF90. Interested in any lead in...

Hello all, The tie bar between my 2 motors has always been problematic and non-standard. Teleflex doesn’t recognize my rod ends as there’s. The bolt thru the ends connecting to the tiller arm adapter is loose and floppy. Either the hole is worn large or they installed a smaller bolt than the...

Does anyone know if I can buy a replacement bracket and leg like the one in the picture. I've read every topic on the forum I can find about these brackets. I've read about the broken bones and more. No one ever says who made this or where to get another. My retractable leg works well, it's...

Hi guys, My current marine head and wash-down intake thru-hull was mounted near the bow on my 24 Tomcat. When underway the intake is out off the water. I wash my boat and clean fish while underway. I need a working wash down pump. Years ago I was at the Seattle Boat Show and saw a brand new...

Hello all, I am replacing the leaking fuel tanks (58 Gal each) on my 20 year old C-Dory Tomcat. There is a tank in each "pontoon". I don't want them to set directly on the fiberglass bottom of the boat. The manufacturer originally had them setting on large goops of 5200. I had the tanks out 8...

Hello all looking for some advice. Noticed my Bomar hatch was leaking so decided to pull it and reseal. All the wood in the core surrounding the window was saturated with water. I dug out all the wet Core and now I need to fill the void. It measures approximately 1/2 inch thick and goes back 2...

Hope someone can help me. I had a cabinet knob come apart and I need to replace it. I've walked the aisles of Lowe's, Home Depot and a local hardware store and still haven't come close. I'd like to have one that matches all the others on the boat as close as possible. Anyone know where to...

Hello all, Well, as long as we were visiting the subject of non-skid I figured I would bring up my project. I would like to know how to reproduce my cockpit floor anit-skid. It has a few chips and I am wondering the best way to redo it. I figured it would start with sanding down the old...

My standby boat (Harbercraft) had a Honda BF-50A on it that I bought new in 2002. Back then I bought the HIGH dollar shop manual from Helm Inc. Well, we re-powered this summer with a Honda BF-50D. The old manual no longer applies, so I listed my old manual on E-bay. I know lots of C-Dories...

Hello All! Looking for some advice. Our boating is done in AK therefore at night we don't like to leave our rear windows wide open but just cracked to let out some of the moisture. Unfortunately they don't like the part way position sometimes and come falling down all the way open. I'm...

Hello all, Was tracking down a faint sewage smell and after getting access to my tank noticed a "brown" stain coming from my 3" access hole on my sewage tank. I want to reseal the fitting and reinstall it. Any suggestions on what would be the best type of sealant to use. I was thinking...

Hello If you have I need some help/ advice. I'm in the process of pulling my Port side tank right now because of a small leak. I removed the dinette area and all of the seating in that area. I've pulled up the star board access panel and removed the flotation foam and the water tank. I cut...

Hi guys, This spring I changed all the brakes on my EZ-Loader trailer for my TC24. I changed from Drum to Disc. I went with the Kodiak brand brakes and so far they have worked out wonderfully. They should after around a $1000 for all four wheels and an actuator. Previously I spent $200 on...

Hello all, This summer I pulled my Wallas 95D from my boat and replaced it with a brand new Wallas 85. If anyone is interested in a 95D that needs some tinkering I've put it up for sale on Craigslist. It was operating when I pulled it but was having some issues. Here's a link to the ad with...

Hello all, The control cables going to my Honda BF-90's are in that fiberglass loom stuff that C-Dory put lots of the wiring in too. The loom going to my outboards is starting to disintigrate from age and UV. What are my replacement options. I see the plastic tubes on the newer boats, but it...

Hope someone can help. I'm getting ready to tackle some repairs and holes from all the different projects I've done on my boat. I've bought the Bennett DVD on fiberglass repair. I also bought "The Fiberglass Boat Repair Manual." I thought this gelcoat thing would be easy. I have the C-Dory...

I ended up with an extra Honda outboard manual that's never been opened. I know lots of you guys have these model motors like I do. I've listed it on ebay and I'm sure it will sell pretty cheap if you're interested. http://cgi.ebay.com/ebaymotors/OEM-HOND ... 20b08dce50

Looking for some Tomcat help/advice. My sea water intake for my toilet and washdown is located on my inner starboard pontoon VERY far forward. All is great until we get underway and up on step. Then the intake is no longer in the water and I can't use the washdown pump to clean up or clean...

My Tomcat has an air horn installed. When I bought the boat the compressor was locked up and I had to buy and install a new one. The horn still only works about 50% of the time. Every time I take the back off the horn and put it back together it works for a while again. Just a thin piece of...

Hi guys, I've discussed this previously but I think new technology comes along and hopefully there is something that works now. We do multiple day trips out in our boat away from marinas. One of our BIG power draws during the night are the dome lights. I have the perko dome lights with the...