Search results

My 2013 Yamaha 200 has made oil for a while. Every 6-7 hrs I was changing the oil. Oil level rose about 1/2" in that time. Seemed to run just fine. 610 hrs. Had the bleed down test yesterday and was told they could not get any of the cylinders past 90#. Told should be around 200#. We discussed...

I just replaced my laptop and now no pictures are displaying from this site. My IT guy said he tried to go in on both Chrome and Edge and they did not display for him either. Benton

I have tried to use that for searching and all I get is: www.google.com is blockedwww.google.com refused to connect. ERR_BLOCKED_BY_RESPONSE My IT guy says it is something with the C-Brats website. Have I missed something? Benton[/b]

The inside cockpit cover broke off and is lost. It is white plastic fitting. I found Marine East Boat Thru Hull 6740w 1 1/2". It does have the flat surface that is toward the floor. Does anyone have experience with this and do you think this is the correct one for our 25'? :shock:

Well I thought I had read enough on here to order a replacement for a dead motor. These are the original AFIs so I thought I could just get the same motor and it would be installed in the exact holes. I thought I read AFI 1000 so I ordered the Marinco AFI 1000. It is quite a bit smaller than...

I have 2 batteries and the original Guest charger. I think it is killing my house batt. How do I test to see if the Guest is sending too much too long to the house battery?

I was winterizing and all necessary switches are on the right panel of my CD 25. Water pump, bilge, emacieator and horn are all on it. Everything went well but then nothing worked. I assume power or ground was lost to it and the left panel is fine. Any suggestions where I should start?

I Oct. 2020 I posted reading to put that on the jell coat of a boat to make it look like new. It did look great for about 30 days. By mid Nov. it was looking as it did before the applying. So I can not recommend doing this. Just my $.02 :?

I need to paint some spots on the aluminum trim around windows and door. I want to brush it on due to spray can over spray. Does anyone know the color number or is there a standard paint with that color? I have seen it here(Biscuit, in rattle can) but do not see it now.

I have done several searches but here is my question: The inside window trim on my 2013 CD 25 gets corrosion behind the paint mostly around the ss screws. I have now noticed the windshield wiper motor housings look like they have the corrosion behind the paint too. I think most of us have that...

Just completed our first overnighter to Oriental, NC and it appears water is leaking from under shower/head platform. There appears to be a hairline crack on the deck of the corner that is in the cabin of our CD 25. I believe our weight forward, at night, allowed the lower bilge water to work...

I want to install hand rails on Finale's (25') cabin top and I want something like those on the cabin in the cockpit. Any suggestions of what from where? :smiled

My CD 25 toilet has a foot actuator for pressure water flush. Apparently the valve under the peddle has gone bad and leaks so bad the pump continues to run. What is the needed part and is this a WM available part? :shock:

I haven't been able to find my questions answered so here goes: 1. I have the SeaDog bow anchor roller that pivots. When I weigh anchor if the anchor comes in too much it slams into the roller and causes it to pivot up. Then the SeaDog slams down on the upper bow gel coat and has chipped it off...

These need painting really bad due to paint flacking off. The screws are frozen in the bracket and the angle does not allow drilling while closed. I have sprayed penetrating oil on the screw heads and no love. Is removing the window and option or does anyone have a better suggestion? :cry:

Sorry for this but I have run out of patience. I have bought a 2013 25' Cruiser and i am having a bimini made. I also like the foredeck cover several of you have made but i can not find pics to show my canvas people. How can I find that? :roll:

I am in the process of getting a used '25 CD and my lift is an issue. Looking for more ideas. My lift runs with the current and at the bow end of the lift is a dock piling. It is on the ICW so rising and falling tides come into play. I need a way to be able to single hand driving on the lift but...