Search results

Boat Sold August 2018

C Dory on trailer

View from the front.

Bench Seating!

Love those twin Suzuki\'s with Permatrim\'s

Boat w/ Lake Conroe in Background

The Commuter Model has forward seating for the skipper and one passenger with bench seats along the sides behind each. Sunbrella covering on all cushions. Bench seating on each side has huge storage capacity underneath with a heavy duty hatch on the top openings. History: I believe the...

I would appreciate the surplus wiper blades and have sent an email (address from your profile) to you with my contact information. Thank you :!: :D

My 2004 C 22 is equipped with two manual windshield wipers. The handles on the inside and mechanisms that penetrate the fiberglass are all there. However the blades themselves and the arms that attach the blades to the mechanisms are missing. By researching the forum I found NAPA part numbers...

My 2004 C 22 is equipped with two manual windshield wipers. The handles on the inside and mechanisms that penetrate the fiberglass are all there. However the blades themselves and the arms that attach the blades to the mechanisms are missing. By researching the forum I found NAPA part numbers...

Thanks for the fast response! Looks like you did a masterful job of rub rail repair! As I only have one area that is now leaking is there any way for me to address the leak from the inside with caulk and not go to the trouble of removing the rub rail at this time? What would you suggest? :D

I noticed on the starboard interior side of my 2004 C- 22 that a bulge in the interior fiberglass that had a rivet attachment for the rub rail on the other side had cracked and water was leaking inside the boat. What is the best repair for this? I have noticed these bulges all along the...

Many thanks for all of the great information! At this point in time I am looking at a Rule 1500 GPH pump with a float switch for the replacement. It appears the old pump base was screwed into the core so I will look to see if there are any issues before installing the new base.

The pump is located in a small depression (sump) in the center of the boat at the transom.

I have found a Rule 1500 gph pump that will need an external switch to activate the pump. Would an external switch pose a problem? Anyone use them as opposed to an internal switch that I have read can cause problems? Thanks.

Some advice please on my 2004 CD 22' original bilge pump replacement. All I can read from the old pump is the following: Model # 62, ISO 8849 Marine Ignition Protection 1500 gpm 12 volt 4.8 amp. The pump snaps into a base that is mounted on the deck and there is no brand name I can read off of...

Great thread! A couple of comments: -Chalking of the gelcoat is caused by the actinic rays (high intensity/UV rays) of the sun. -Chalking is actually the degradation of the top layer of the gelcoat -Abrasive cleaners, pads, etc., remove this top layer exposing the new glossy gelcoat below...

Looks like I have a lot of work to do! I greatly appreciate all of the input I am getting as I really want to get my CD set up properly so we can enjoy her for many years. This weekend I will get a buddy and be on the water early to perform the tests that have been recommended. I think the...

Excellent information :!: I will perform the test as soon as I can. This begs another question: How difficult is it to adjust the height of the outboards upward should they need it :?: :D