25 Cruiser table leg replacement

A

Anita Marie

New member
Joined
Oct 31, 2003
Messages
826
Reaction score
0
C Dory Year
2005
C Dory Model
25 Cruiser
Vessel Name
Anita Marie
Does anyone have the make and model of the table leg replacement for a 25 Cruiser. Mine is getting rusty and I would like to replace it.

Thanks
Fred
 
Fred, I'd send a PM to the factory or call Scott Boysen.

Charlie
 
Fred, I don't recall what the table leg looks like on the 25 but the one on my previous 22 was getting rusty and wasn't looking so good. I just took some 400 sandpaper to it and the surface rust came off pretty easy. Then I hit it with some wax and it looked pretty good again. You might want to try just sanding it down.
 
Fred, we have a replacement table leg, and it is a whole lot sturdier than the original, but as I think you observed, it was starting to corrode. Not sure of brand, we actually bought it from LUSR.
 
Check out pics #17 & #18 in my album. I got the leg from JC Whitney. It was an exact match to the one the factory installed on my CD 22.
 
Back
Top