purchased new in 1985 from the Tolands at C Dory in Kent a 22' Angler and E-Z load M 6 3100 trailer. I was unaware that they modified the trailer and installed lateral bunks and a large roller across the back. Well the roller broke and C Dory and E-Z load are no help finding a replacement, anyone know if those rollers are still available somewhere.
85 E-Z load trailer for 22' C Dory Angler rear roller broken
- Thread starter Tony NFTF
- Start date
UncleRichie
New member
picture would help a lot
Richard
Richard
Wandering Sagebrush
Free Range Human
Tony, check drift boat trailer sources. They often use rollers all the way across the back.
The trailer parts are not made by C Dory or the trailer manufacture. We don't have any idea of what type of roller you have: length, diameter in the center, diameter at the ends, diameter of steel bar which goes thru the center. Once you have these measurements, you can go on line and find a replacement. Just search "trailer roller" . You will find a replacement there. Also there is most likely a trailer parts outfit near where you live. Again with the measurements you can call around and find the item you need.