nordicstallion":2eigenke said:
Hi kids. I'm wondering, do any of you boys use the salt away engine wash out system to introduce anti-freeze into the water jacket of your outboard motors in preparation for freezing weather or winter storage in colder areas? Or is there another method? Vern
Vern-
I've never heard of using antifreeze in an outboard.
It's best just to completely drain the entire motor, and store it out of the water. (The motor will completely drain if stored upright out of the water.)
If you have to leave the boat in the water, there are two choices (according to traditional thought):
1. Tilt the motor up. However, there may be some remaining water in the lower unit, depending on the design. If it freezes, it could cause serious damage. So...
2. Leave the motor down, so that the water (as long as it doesn't freeze) keeps the lower unit warm and unfrozen. (The upper powerhead should drain, leaving it invulnerable.) However, if the water (lake) freezes, all bets on your lower unit are off!
I suppose one could tilt the motor up then blow out the motor and lower unit with compressed air (if available), but this may prove impractical on a repeated basis.
If antifreeze were to be used, then the powerhead and lower unit would have to be sealed somehow to keep it in and undiluted, I'd suppose.
Let's see what others say……..
Joe. :teeth :thup