I have noticed several CDs fueling very slowly and holding lots of sorbents at the ready.
Since day one, we have had to fill the starboard fuel tank as slow as humanly possible to avoid fuel burping back out. Serious hand cramps from holding the nozzle on ridiculously slow for 40 or 50 gallons. This weekend, after one hand cramp too many, I found that the tank vent hose was kinked just a little.
This is in a very difficult to access location, and difficult to work in, but I cut out the kinked section, and repaired the hose with a brass double-barb fitting and some hose clamps and the problem has gone away.
Since day one, we have had to fill the starboard fuel tank as slow as humanly possible to avoid fuel burping back out. Serious hand cramps from holding the nozzle on ridiculously slow for 40 or 50 gallons. This weekend, after one hand cramp too many, I found that the tank vent hose was kinked just a little.
This is in a very difficult to access location, and difficult to work in, but I cut out the kinked section, and repaired the hose with a brass double-barb fitting and some hose clamps and the problem has gone away.