Fuel tank fittings

L

little wing

New member
Joined
Sep 21, 2016
Messages
110
Reaction score
0
C Dory Year
2005
C Dory Model
22 Cruiser
Vessel Name
Toots
This is my starboard tank.

20170511_130352.jpg

This is my port tank.

20170511_130305.jpg

At least one side needs work. Before I get into it, does anyone know what kind of fittings these are and where I might find replacements? I'm hoping they are screw in. I wrote to C-dory. Do you think I'll get an answer?

Plus, that fuel fill line looks like it's going to be a bitch to work with being such a short run and not much flex.
 
I don't know but hopefully others will know and or the tank vendor decal is on tank in a different locations My AL tank is made by RDS and has a nice decal by the fittings and specs. My fuel pickup fittings are made of aluminum. Does your tank have a bonding wire (ground)
 
D'oh. Good call. Found the info on the side. It's a Moeller poly tank. I'll contact them.
 
This is what it looks like when a battery in the starboard lazarette is boiled over and acid runs down onto the fuel tank. Lots of water and baking soda to get this mess cleaned up and neutralized.
 
Back
Top