Here is the situation:
C-Dory 25 (2006) at the dock with shore power connected. Guest Bat. Sw. on main only. The main Bat. bus consists of two deep cycle bat., Guest OEM 5/5 charger on line.
My xantrex volt/amp/bat.% cage starting showing unusual discharge in the range of -18.2 amp/hr. discharge with minimun dc equip. operating. The house batt. were very slowly going from 98% to 90%. The bat. charger red light on, indicating charging, however it became hot to the touch and eventualy stopped charging, cooled down and went in to charge mode again.
Charger not charging properly or do I have a main bat. failing?
Thanks
C-Dory 25 (2006) at the dock with shore power connected. Guest Bat. Sw. on main only. The main Bat. bus consists of two deep cycle bat., Guest OEM 5/5 charger on line.
My xantrex volt/amp/bat.% cage starting showing unusual discharge in the range of -18.2 amp/hr. discharge with minimun dc equip. operating. The house batt. were very slowly going from 98% to 90%. The bat. charger red light on, indicating charging, however it became hot to the touch and eventualy stopped charging, cooled down and went in to charge mode again.
Charger not charging properly or do I have a main bat. failing?
Thanks