As mentioned in a earlier thread we purchased a 25 C-Dory at this years boat show. Thought it might be a good idea to at least go out on one before I took delivery of ours. I have a lot of experience on boats but all have been deep or modified V hulls. I wanted to see how the C-Dory hull handled in some waves.
Well I guess you should be careful what you ask for, the conditons today were small craft warnings with the wind blowing 20- 30 mph. I again would like to thank Dick for going out in these conditoins. You could see the white caps from the parking lot but I did not appreciate how rough it was going to be until on the way out the spray was coming over the jetty and as soon as we got out in the open we were greeted by sets of 5+ foot waves that were very close together. We proceeded out for maybe 10 minutes before we turned around and headed back. The C-Dory handled the conditions well I thought and it is nice to know that if I should ever see conditions like that again I have an idea how the boat will handle it, although I do not plan on going out in small craft warnings too often if ever.
I also met with Jeff at the Kent factory to review our boat and options. Our boat is scheduled to start production at the end of the month and deliver in early May. I did not realize that the boats from the Monroe plant come down to Kent to be rigged. It looks like we'll be taking delivery in Kent and then taking the boat by water up to Twin Bridges for it's first inaugural trip. It was nice of Jeff to offer to travel with us to go over the boat on it's trip from Kent. This was my first trip to the factory, and I noticed that they have very limited space to work with. We found out they are looking to consolidate both plants into one large facility.
Just thought I would let everyone know about my first adventure on the C-Dory 25, with many more to come.
Scott and Laurie
Well I guess you should be careful what you ask for, the conditons today were small craft warnings with the wind blowing 20- 30 mph. I again would like to thank Dick for going out in these conditoins. You could see the white caps from the parking lot but I did not appreciate how rough it was going to be until on the way out the spray was coming over the jetty and as soon as we got out in the open we were greeted by sets of 5+ foot waves that were very close together. We proceeded out for maybe 10 minutes before we turned around and headed back. The C-Dory handled the conditions well I thought and it is nice to know that if I should ever see conditions like that again I have an idea how the boat will handle it, although I do not plan on going out in small craft warnings too often if ever.
I also met with Jeff at the Kent factory to review our boat and options. Our boat is scheduled to start production at the end of the month and deliver in early May. I did not realize that the boats from the Monroe plant come down to Kent to be rigged. It looks like we'll be taking delivery in Kent and then taking the boat by water up to Twin Bridges for it's first inaugural trip. It was nice of Jeff to offer to travel with us to go over the boat on it's trip from Kent. This was my first trip to the factory, and I noticed that they have very limited space to work with. We found out they are looking to consolidate both plants into one large facility.
Just thought I would let everyone know about my first adventure on the C-Dory 25, with many more to come.
Scott and Laurie