colbysmith
Active member
As someone that does a lot of my own maintenance, I’ve spent a lot of time tracking down part numbers that haven’t always been easy to get from the various manufacturers of our boats and trailers. So I thought I would start this thread to help others out so that they don’t have to duplicate effort that has already been done. Perhaps others can add to this with information they’ve ascertained from their own endeavors.
Regarding the Sea Star Hydraulic Steering systems. The following part numbers work with my CD-25 Outboard Ram p/n HC 5358 (8.34cuin), but I believe my earlier CD-22 had a slightly smaller ram, and these part numbers were the same.
Ram Seal Kit HS 5157. However, you can just replace the actual seals inside those ends. Each end requires 1 each of the following, so you would need 2 each to do both ends:
Seals HW-0750N and DPU12-0.75-12, Oring 126 Buna.
I use Aeroshell #41 (Mil H5606) in my system with no issues. Earlier SeaStar listed this as an alternative fluid. You can get this from a general aviation maintenance shop, or order online from Amazon or Aircraft Spruce supply. A gallon can is about $37.
Field fittings (end fittings) for the 5/16” hydraulic hose: 2TFMS-6-5B. I have used several of these fittings allowing me to reuse original hose when I cut it to insert a tee for my autopilot, and they work well. They can be a PITA to put on, but with patience they can save hundred’s of dollars over buying new hoses.
Regarding the LoadRite LR-AB26T8400102LTB2 trailer:
Outer bearing 15123 (1.25” x 2.44”) Race 15245
Inner bearing 25580 (1.75” x 3.2650”) Race 25520
Seal 22333TB (2.25” x 3.376” x .375”)
If you change from greased bearings to oil bath, using the Kodiak Prolube 2.44 Kit, be advised that the seals enclosed with that kit won't fit. You will need to get the seal 22333TB. The original seals did not have a number but showed those exact dimensions stamped on the outer shell.
And FWIW, the smaller Kodiak kit for the EZ Loader trailers under the CD-22 also includes the wrong seal. Don't hold me too it, but I believe the seal you need is a TCM 168255TC-BX, which is rubber coated.
Hull and interior Color match for the white gelcoat seems to work well with the Rustoleum Heirloom White.
2009 CD-25 wiper arm: AFI 33032A (This is the entire articulating arm, not the blade.)
The mast or anchor light that plugs in, and has two terminals: Perko Pole Light P/N 1209DP2CHR
Regarding the Sea Star Hydraulic Steering systems. The following part numbers work with my CD-25 Outboard Ram p/n HC 5358 (8.34cuin), but I believe my earlier CD-22 had a slightly smaller ram, and these part numbers were the same.
Ram Seal Kit HS 5157. However, you can just replace the actual seals inside those ends. Each end requires 1 each of the following, so you would need 2 each to do both ends:
Seals HW-0750N and DPU12-0.75-12, Oring 126 Buna.
I use Aeroshell #41 (Mil H5606) in my system with no issues. Earlier SeaStar listed this as an alternative fluid. You can get this from a general aviation maintenance shop, or order online from Amazon or Aircraft Spruce supply. A gallon can is about $37.
Field fittings (end fittings) for the 5/16” hydraulic hose: 2TFMS-6-5B. I have used several of these fittings allowing me to reuse original hose when I cut it to insert a tee for my autopilot, and they work well. They can be a PITA to put on, but with patience they can save hundred’s of dollars over buying new hoses.
Regarding the LoadRite LR-AB26T8400102LTB2 trailer:
Outer bearing 15123 (1.25” x 2.44”) Race 15245
Inner bearing 25580 (1.75” x 3.2650”) Race 25520
Seal 22333TB (2.25” x 3.376” x .375”)
If you change from greased bearings to oil bath, using the Kodiak Prolube 2.44 Kit, be advised that the seals enclosed with that kit won't fit. You will need to get the seal 22333TB. The original seals did not have a number but showed those exact dimensions stamped on the outer shell.
And FWIW, the smaller Kodiak kit for the EZ Loader trailers under the CD-22 also includes the wrong seal. Don't hold me too it, but I believe the seal you need is a TCM 168255TC-BX, which is rubber coated.
Hull and interior Color match for the white gelcoat seems to work well with the Rustoleum Heirloom White.
2009 CD-25 wiper arm: AFI 33032A (This is the entire articulating arm, not the blade.)
The mast or anchor light that plugs in, and has two terminals: Perko Pole Light P/N 1209DP2CHR
