raising the seat

B

berryst

New member
Joined
Aug 14, 2011
Messages
135
Reaction score
0
C Dory Year
1985
C Dory Model
22 Angler
Vessel Name
Margaret Ann
My passengers complain that the seats are too low. They all want to sit up and look out the front windows. I can think of a couple of ways to do this;
First a seat on post with a swivel ....across from the helm ,
2nd raising the "box" under the back seat...just build it up.
Does anyone have thoughts on this.
The newer dories all have seats that are higher I believe so for them its not an issue
Chris
 
I don't know what the setup is on the port side of the '85 angler. But, if it works, do a search for boat seat pedestals. They come in various heights, swivel, and the seat can slide back and forth if you want that.
 
Chris,

You can easily raise the helm seat with wooden blocks. We have a nested album in Valkyrie's album showing how to do so.

I had our canvas guy put denser foam in the helm seat, which raises the seat, as well. We thought of doing the same with the passenger seat, but didn't want to make it too hard to sleep on ( our dinette drops into a berth ). My wife usually sits on a throwable cushion when in the passenger seat.

Hope this helps,

Nick
"Valkyrie"
 
We are fighting the same issue. We have only had the boat on the water twice before the tear down and rebuild but I am looking for solution also. This weekend will prove weather we need to make a major change or not.

The port side forward facing seat we made a set of blocks out of 2X4's to raise it up so that my wife can see out the windows, and we remove it when we use the table. The issue is storage space for the blocks is going to be an issue on the longer runs.
 
It seems like a simple problem but not so fast. Raising the port seats in a permanent way probably means raising the table and the floor too. Raising the table has its own issues but a raised table gives the right table height for the helm seat. ...great for cards.
.
Raising the floor gives the the right height for the back port seat and the front port seat facing to the rear....but the front port seat flipped around and facing forward does not leave very much leg room.
I have an Angler so maybe I will just have to improvise. I sort of hate to loose the bunk that the table makes when its down by putting a permanent front seat. Right now that bunk runs form the tip of the bow to the bulk head. Then if the seats are down where do they go ..out to the deck?
.
I am rambling a bit and I'm sure this is confusing by now but I am bound and determined to fix it. Right now I'm leaning to raising the back port seat in a permanent way (by building the seat box higher) with a flip down seat and a swivel front port seat on a pedestal. This way I pick up a little storage under the new floor and the back seat. I just wonder if I'm missing something. ...maybe not. Is raising the table going to make new issues when its secured to the wall.....hmmmm. So many great ways to go terribly wrong.
Chris
 
West marine has a nice fully portable and inexpensive folding seat with an articulating back. The bottom of the thing is cushioned so there is no harm to the existing seating. It raises the seat height about 3 inches. 49 bucks, easy to store. Just a thought.
 
That west marine seat is an excellent idea. I seriously thought about it before I purchased the Garelick swivel slide seat mount!
 
Thankyou every one..I'll try the simple cushion seat and see if it works.
Chris
 
The seat set up in our 19’ must have been designed for a short legged, long torso person. Also, as the seat turned it wore on the cushion behind it.

The obvious solution was to raise the seat, it took a while with several options, but finally came to the easiest way (for us) was to purchase a 7” Attwood Economy Pedestals from Cabela’s and have our local machine shop cut it down to 3” high.

For Connie’s seat, the 7” Economy pedestal was cut down to 4” which worked best for her.

Thought the information would help others that are personalising their C-Dory’s.

Regards,

Ron Fisher

http://www.c-brats.com/modules.php?set_ ... _photo.php
_________________
1983 22' Classic, sold April 2011
1990 16' Angler, sold January 2012
2004 19' Angler, purchased January 2012

"We Have Met The Enemy and He Is Us"
 
Back
Top