Reality Check, Good deal?

Spent Saturday cleaning up the cabin. I added a few pics to my album.

The exterior needs a really deep cleaning which I'm hoping I can work on around the yard's schedule for the other repairs.
 
Looks good! did you just remove the dinette for cleaning?
 
That’s awesome! Congratulations! I love boat projects. About 11 years ago I bought a wrecked just boat and totally rebuilt it. I had to strip in down bare and build it back up. It was a great winter project and I’m glad I did it. A great learning experience, that’s for sure.
 
The boat yard offered to do a "light wash" for me since they have to clean the area for the fiberglass repair anyways. I stopped by today and wow...she looks amazing. This is before any polishing or waxing but I'm amazed at how well she cleaned up.

IMG_20200324_152238.jpg


Fiberglass repair should be done by Friday, then bottom paint possibly this weekend. After that, I need to polish and wax her and launch her. Hopefully by the 4th!
 
curioustraveler":1tc9fz9k said:
The boat yard offered to do a "light wash" for me since they have to clean the area for the fiberglass repair anyways. I stopped by today and wow...she looks amazing. This is before any polishing or waxing but I'm amazed at how well she cleaned up.

IMG_20200324_152238.jpg


Fiberglass repair should be done by Friday, then bottom paint possibly this weekend. After that, I need to polish and wax her and launch her. Hopefully by the 4th!
Click to expand...

If you are going to bottom paint, Where are you going to have the waterline be? Right now the boat is as light as it will probably ever be, thus the waterline will be as low as it might ever be. If they are going to float it for the level, consider adding a couple of inches to take care of the added weight that your boat will gain as you start to do things like fill fuel and water tanks, add stores and equipment for your use, fishing or cruising.

Harvey
SleepyC :moon

0_God_s_Pocket_Anchorage.sized.jpg
 
Based on the photos of my boat in the water, under our loading conditions, the factory waterline seems to be pretty accurate.
 
Harvey, that's a good point and thanks for mentioning it. I was just going to have them add another cost to the paint that's already there. It looks like it's the factory height.

SSOBOL, how loaded up are you? There's just 2 of us and a 60lb dog, 12 gallon tanks, and I doubt we'll be doing anything more that weekend trips.
 
curioustraveler":18yz384f said:
Harvey, that's a good point and thanks for mentioning it. I was just going to have them add another cost to the paint that's already there. It looks like it's the factory height.

SSOBOL, how loaded up are you? There's just 2 of us and a 60lb dog, 12 gallon tanks, and I doubt we'll be doing anything more that weekend trips.
Click to expand...

It was two of us and full fuel (46 gal) plus stuff for 4-5 days.

1020779_G.jpg

You might want to check the lateral load though. Some boats sit lower on one side than the other.
 
Very exciting day...Curious Traveler is launched. We didn't get to go out because the whitecaps were coming off the bay and into our creek. But she's at least in her slip. Pic in my album.
 
ssobol":trwrt8ir said:
Based on the photos of my boat in the water, under our loading conditions, the factory waterline seems to be pretty accurate.
Click to expand...

Boats like many people, gain weight over time. Plan ahead.

This was SleepyC brand new, and the water line fit fine there, a few years back.
IMGP1286.sized.jpg

And, Enjoy,

Harvey
SleepyC :moon

7_SleepyC_at_Port_Harvey_001.sized.jpg
 
Back
Top