spuncopper
New member
- Joined
- Sep 2, 2012
- Messages
- 196
- Reaction score
- 0
- C Dory Year
- 2007
- C Dory Model
- 16 Cruiser
- Vessel Name
- Sock Monkey
Okay folks,
I have, what appears to be a 'simple' project of relocating the two tilt lock pins up one set of holes on my 2007 Suzuki DF 50.
It appears I can:
Release the pressure on the power tilt and trim
Tilt the engine up manually
Remove the two bolts holding the lower tilt cylinder shaft
Rotate it up and out of the way
Move the two tilt lock pins to the new location
And put everything back together again.
Am I missing anything?
Thanks! Spuncopper
I have, what appears to be a 'simple' project of relocating the two tilt lock pins up one set of holes on my 2007 Suzuki DF 50.
It appears I can:
Release the pressure on the power tilt and trim
Tilt the engine up manually
Remove the two bolts holding the lower tilt cylinder shaft
Rotate it up and out of the way
Move the two tilt lock pins to the new location
And put everything back together again.
Am I missing anything?
Thanks! Spuncopper