(AnchortownJim) Flowscan Accutrol fuel flow meter

(AnchortownJim) Flowscan Accutrol fuel flow meter

  • Reaction score 0
  • Comments 0
(AnchortownJim) View of the location of the trim tab control switches, and the location of the windless on/off switch.

(AnchortownJim) View of the location of the trim tab control switches, and the location of the windless on/off switch.

  • Reaction score 0
  • Comments 0
(AnchortownJim) Had to turn the trim tab through hull fittings 90 degree to clear the fuel tanks.

(AnchortownJim) Had to turn the trim tab through hull fittings 90 degree to clear the fuel tanks.

  • Reaction score 0
  • Comments 0
(AnchortownJim) Trim Master pump, mounted in the port lazerette.

(AnchortownJim) Trim Master pump, mounted in the port lazerette.

  • Reaction score 0
  • Comments 0
(AnchortownJim) Trim Master trim tab on the port side.

(AnchortownJim) Trim Master trim tab on the port side.

  • Reaction score 0
  • Comments 0
(AnchortownJim) Paper towel holder held up with industrial strength double sided foam tape.

(AnchortownJim) Paper towel holder held up with industrial strength double sided foam tape.

  • Reaction score 0
  • Comments 0
(AnchortownJim) Nicro Vent 2000 Day/Night mounted in the hatch.

(AnchortownJim) Nicro Vent 2000 Day/Night mounted in the hatch.

  • Reaction score 0
  • Comments 0
(AnchortownJim) The drawers have full extension slides.

(AnchortownJim) The drawers have full extension slides.

  • Reaction score 0
  • Comments 1
(AnchortownJim) The drawers I built to fill the void from the removed ice box. The fronts are made out of 3/4" Starboard.

(AnchortownJim) The drawers I built to fill the void from the removed ice box. The fronts are made out of 3/4" Starboard.

  • Reaction score 0
  • Comments 0
(AnchortownJim) Glued a piece of 3/4" marine plywood to the hull with 3M 4200. Mounted the DC bus bars, one for the switched house circuits, one for non-switched and a common ground bus. This was driven by the installation of the windless.

(AnchortownJim) Glued a piece of 3/4" marine plywood to the hull with 3M 4200. Mounted the DC bus bars, one for the switched house circuits, one for non-switched and a common ground bus. This was driven by the installation of the windless.

  • Reaction score 0
  • Comments 0
(AnchortownJim) Pulled out the useless ice box beneath the helm seat. The object on the left is a Blue Seas Systems 8080 2 bank battery switch with a DC Breaker.

(AnchortownJim) Pulled out the useless ice box beneath the helm seat. The object on the left is a Blue Seas Systems 8080 2 bank battery switch with a DC Breaker.

  • Reaction score 0
  • Comments 0
(AnchortownJim) Close up of the plug for the windless control. You can easily disconnect the control if you want to. I leave it connected on the dash.

(AnchortownJim) Close up of the plug for the windless control. You can easily disconnect the control if you want to. I leave it connected on the dash.

  • Reaction score 0
  • Comments 0
(AnchortownJim) Windless control.

(AnchortownJim) Windless control.

  • Reaction score 0
  • Comments 0
(AnchortownJim) Quick windless below deck.

(AnchortownJim) Quick windless below deck.

  • Reaction score 0
  • Comments 0
(AnchortownJim) ASTER 500 installed, starboard view.

(AnchortownJim) ASTER 500 installed, starboard view.

  • Reaction score 0
  • Comments 0
(AnchortownJim) ASTER 500 installed, port view.

(AnchortownJim) ASTER 500 installed, port view.

  • Reaction score 0
  • Comments 0
(AnchortownJim) ASTER 500 installed, plan view.

(AnchortownJim) ASTER 500 installed, plan view.

  • Reaction score 0
  • Comments 0
(AnchortownJim) ASTER 500 mounting plate in plan view, prior to expoxying to the deck. The plate allows for easy removal of the windless for maintenance.

(AnchortownJim) ASTER 500 mounting plate in plan view, prior to expoxying to the deck. The plate allows for easy removal of the windless for maintenance.

  • Reaction score 0
  • Comments 0
(AnchortownJim) Quick ASTER 500 mounting plate made out of 3/16" 6061 aluminum, prior to being epoxied to the deck with MarineTex, side view.

(AnchortownJim) Quick ASTER 500 mounting plate made out of 3/16" 6061 aluminum, prior to being epoxied to the deck with MarineTex, side view.

  • Reaction score 0
  • Comments 0
A

(AnchortownJim) Quick ASTER 500 mounting plate made out of 3/16" 6061 aluminum, prior to being epoxied to the deck with MarineTex, side view.

No description
Click to expand...
There are no comments to display.

Album information

Category
Coho Improvements
Album owner
AnchortownJim
Date created
Item count
43
View count
3,650
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

A

AnchortownJim

Media items
154
Albums
12
Can view media items
Inherited from category
Can add media items
Album owner only

Share this album

Back
Top