spreader bar in position to. hoist air conditioner. The outer carabiners are used for hoisting the dinghy, the inner D shackles go over the handles of the window AC unit. The shelf above has two pieces of 1 1/2" aluminum angle to take the load of the 6 part block and tackle.The shelf was re-enforced with aluminum "L" bracket.
- thataway
- Oct 5, 2019
- 0
- 0
port bulkhead removed to open up the V berth. Note 4" memory foam pad on top for comfort! We have also put pads on the side of the bunk and under the bunk to eliminate any condensation there. There is a teak grab rail on the upper forward area under the windshield. In back of that is another dual outlet USB charger. There ia the Maestro fan in the outboard part of the aft part of the V berth. The control for this (speed, light --white or red) is located just inside on the overhead. The fan is easily adjusted from either in the bunk or from outside. Same for the other side. The cutout opens up the cabin, and makes entry into the bunk much easier.
- thataway
- Oct 5, 2019
- 0
- 0
3 drawers under the helm seat. custom helm seat. Ventilation for Inverter charger on aft and inner parts of Starboard V berth. On the floor is bag which the AC unit sits in when not in the window. This goes under the V Berth. There is also vinyl loo mat on the floor of AC storage, and the cabin floor. Dry deck under the mat.
- thataway
- Oct 5, 2019
- 0
- 0
Shade and rain cover over window AC. This is made of shelter Rite which is a PVC material with scrim and is very close to the material that the inflatable boats are made of. There is a second shade made of white sunbrella (not as waterproof and slightly smaller shade. With this in place, there is a "Down" position, which will allow the forward hatch to be cracked open for ventilation and no water come in.
- thataway
- Oct 5, 2019
- 0
- 0
