test fit

test fit

  • Reaction score 0
  • Comments 0
scaffold

scaffold

  • Reaction score 0
  • Comments 0
sump area sanded and ready for extra layers of glass

sump area sanded and ready for extra layers of glass

  • Reaction score 0
  • Comments 0
main area of repair in the cabin, ready for layup. all voids from layup filled

main area of repair in the cabin, ready for layup. all voids from layup filled

  • Reaction score 0
  • Comments 0
all voids and low areas filled, wiped with acetone

all voids and low areas filled, wiped with acetone

  • Reaction score 0
  • Comments 0
TEST PANEL: no bubbles formed after the initial layup

TEST PANEL: no bubbles formed after the initial layup

  • Reaction score 0
  • Comments 0
TEST PANEL: results look good

TEST PANEL: results look good

  • Reaction score 0
  • Comments 0
voids ground out

voids ground out

  • Reaction score 0
  • Comments 0
TEST PANEL: hard to see. it looks like there are lots of microscopic bubbles. no large voids or epoxy starved areas.

TEST PANEL: hard to see. it looks like there are lots of microscopic bubbles. no large voids or epoxy starved areas.

  • Reaction score 0
  • Comments 0
TEST PANEL: 10 min after rolling out 1708

TEST PANEL: 10 min after rolling out 1708

  • Reaction score 0
  • Comments 0
TEST PANEL: looks pretty good, no starved areas. a few very small bubbles

TEST PANEL: looks pretty good, no starved areas. a few very small bubbles

  • Reaction score 0
  • Comments 0
TEST PANEL: 1708 on top, used a fin roller to roll bubbles out. hard to see voids/ bubbles because the thickened epoxy is kind of milky colored

TEST PANEL: 1708 on top, used a fin roller to roll bubbles out. hard to see voids/ bubbles because the thickened epoxy is kind of milky colored

  • Reaction score 0
  • Comments 0
TEST PANEL: 1708 wetted out and ready to go on to balsa/ thickened epoxy

TEST PANEL: 1708 wetted out and ready to go on to balsa/ thickened epoxy

  • Reaction score 0
  • Comments 0
TEST PANEL: used a small notched trowel to put on a thin layer of 'lightly thickened' epoxy

TEST PANEL: used a small notched trowel to put on a thin layer of 'lightly thickened' epoxy

  • Reaction score 0
  • Comments 0
TEST PANEL: after 30 min or so, epoxy starting to soak in. not really any bubbles forming

TEST PANEL: after 30 min or so, epoxy starting to soak in. not really any bubbles forming

  • Reaction score 0
  • Comments 0
TEST PANEL: immediately after rolling epoxy on

TEST PANEL: immediately after rolling epoxy on

  • Reaction score 0
  • Comments 0
TEST PANEL: rolled epoxy onto top of balsa

TEST PANEL: rolled epoxy onto top of balsa

  • Reaction score 0
  • Comments 0
20210413 102733

20210413 102733

  • Reaction score 0
  • Comments 0
20210413 102719

20210413 102719

  • Reaction score 0
  • Comments 0
epoxy starved areas

epoxy starved areas

  • Reaction score 0
  • Comments 0
epoxy starved areas

epoxy starved areas

  • Reaction score 0
  • Comments 0
coring with thickened epoxy over

coring with thickened epoxy over

  • Reaction score 0
  • Comments 0
20210413 102714

20210413 102714

  • Reaction score 0
  • Comments 0
bonded

bonded

  • Reaction score 0
  • Comments 0
C

Patch from a collision?

  • Items 247
  • Album owner clayhubler
  • Date created
There are no comments to display.

Album information

Category
Core rot repair
Album owner
clayhubler
Date created
Item count
247
View count
8,810
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

C

clayhubler

Media items
553
Albums
32
Can view media items
Inherited from category
Can add media items
Album owner only

Share this album

Back
Top