Recent content by multimediasmith

  1. multimediasmith

    Comment by 'multimediasmith' in album 'Marinaut Heat Pump / AC install'

    Finally got around to uploading overdue pics (so busy with house projects since Hontoon) Album link: https://www.c-brats.com/media/albums/marinaut-heat-pump-ac-install.22690/ https://www.c-brats.com/media/albums/marinaut-heat-pump-ac-install.22690/
  2. A/C freshly mounted days before Hontoon (photo credit Laska) - Thanks

    A/C freshly mounted days before Hontoon (photo credit Laska) - Thanks

  3. Thankfully the cabin top has a FLAT area on which to mount

    Thankfully the cabin top has a FLAT area on which to mount

  4. Low profile inside components works with remote or phone app

    Low profile inside components works with remote or phone app

  5. The Greenland inverter draws only 700 watts and runs off the 1500w inverter… shore power…or the 2Kgenny

    The Greenland inverter draws only 700 watts and runs off the 1500w inverter… shore power…or the 2Kgenny

  6. Slack loops in wire allows cover removal without disconnecting from unit

    Slack loops in wire allows cover removal without disconnecting from unit

  7. Marinaut Heat Pump / AC install

    Marinaut Heat Pump / AC install

    Cutting a hole in my perfectly good cabin top,,, worth it?
  8. A single AC 110 power input fed from either shore power or inverter feeds all outlets through a 15amp circuit breaker

    A single AC 110 power input fed from either shore power or inverter feeds all outlets through a 15amp circuit breaker

    This eliminates any question about what’s powering which outlets
  9. Used the good Marine wire - pre tinned and less corrosive

    Used the good Marine wire - pre tinned and less corrosive

    A single AC 110 power input fed from either shore power or inverter feeds all outlets through a 15amp circuit breaker
  10. Measure and remeasure

    Measure and remeasure

  11. PPE

    PPE

  12. Remove extremely hard foam and replace with extremely hard wood

    Remove extremely hard foam and replace with extremely hard wood

    This is done to prevent the rooftop from compressing into a water trap dip when the AC is clamped tightly down
  13. Cherry inserts with 1/8” aluminum angle trim

    Cherry inserts with 1/8” aluminum angle trim

    Cutout piece used for planing wood inserts to proper thickness… Not bowing the fiberglass up but allowing enough clearance for sealant
  14. Channel ready for compression inserts of Brazilian Cherry

    Channel ready for compression inserts of Brazilian Cherry

  15. Hook allows repeated removal for fitment

    Hook allows repeated removal for fitment

Back
Top