Search results

This shows what I plug the generator into.

Y barb used inside the generator.

Absolutely. If you add a can of Seafoam to each of your fuel tanks it will actually separate out the water from your fuel. Water will be at the bottom of the tank where your pickup is. In the morning before you get underway pump the fuel primer bulb. This will be the best time to catch some of...

After getting the fuel cleaned up. You have to prevent water from continuing entering the tanks. Replace your fuel tank vents with a P-Trap style vent. https://www.amazon.com/Attwood-Corporat ... 374&sr=8-3[url] This prevents rain water from being sucked into the fuel tanks by sloshing fuel...

I like how you leveled out the deck in the cabin center walkway.

The picture doesn't show it, but it is actually 3 separate panels. I used Tightbond III wood glue with screws to secure the boards to the joists. All the screws are plugged and have two really thick coats of epoxy that coated even the edges of each board, top and bottom. Definitely not coming...

Tired of wet unlevel feet. So decided to build some deck grating for the cockpit. Made from Western Cedar, 2 coats of epoxy top and bottom. UV protected with satin varnish. Cost $330, finish weight 61lbs. Built in 3 panels for easy cleaning/ access.

Sealed completely with 2 coats of epoxy and UV treated with satin varnish.

Total weight is 61 lbs.

Cedar deck grates are built in 3 sections for easy cleanout.

Deck grate build.

In case anyone planning on a trip to the Bahamas. Starting July 1st, 2025 it will cost $800 USD total, for a cruising permit, anchor permit, and fishing permit. For any boat under 35 ft. Below is pasted from the new amended Bahamian Law book for your reading enjoyment! “ 89B. Frequent Digital...

I second that what Bob said, spray salt away on your brakes and disks. Or any soapy mix, simple green works too. The soap will keep the metal from rusting together. Divers welding under water, dip their welding leads in a bucket of soap to prevent surface rust while on lunch break. It works!

Generator Platform

I built a platform in the motor well for my Magma gas grill that can hold the Honda Generator when not using the grill. Now I put the grill when I am cooking, on a wood box that is storage for my aft anchor. I don't worry about gas tank fumes with an open flame because the vents are outside of...

Don was confirming with the manufacturer of C-Dory that the bulkhead is not structural. Also giving us appreciation for our advice too. In my industry, the saying is; “trust but verify, no matter who they are.”Thanks for the feedback Don

Cut the forward bulkhead out! Instant 2-foot gain. I was REALLY thinking about getting a longer boat too. It took me 5 years to finally get the balls to cut out the forward bulkhead to the v-birth. I wish that I did this when I bought it 5 years ago. I looked at Rosborough really hard. I...