Search results

Ordered two! Thank You!

Photo submitted.

http://www.c-brats.com/albums/album3057 ... .thumb.jpg I built some proper drawers for our 22' Cruiser. It feels like a whole different boat! This is a must upgrade for a C-Dory boat.

Subscribed! Thanks for making the Videos!

I buy REC89 (no ethanol) in Florida. I have one large aluminum fuel tank that is partitioned in the middle. Each side holds 20 gallons for a total of 40 gallons. Never have drained the carbs, I use Sea Foam (standard) fuel treatment by the gallon at O'Reilly Auto Parts for $52.99 Each. I fill...

Harvey, Thanks for sharing the information about the models. Might start making some Tom Cats if anyone has detailed line drawings of the boat it can help with a design. (I don't own a Tom Cat so it will be quite difficult to build it as close to scale) Love the low maintenance and running...

C-Dory Half Hulls (Have a couple left. Message me if interested)

I believe in my opinion, that the boats built before 1998 are the best value for the money. Even if it needs a trailer and a new engine. I like the real fiberglass aft hatch covers over the battery compartments and the plywood interior that can be modified very easily. Unlike the molded newer...

http://www.c-brats.com/albums/album3057 ... .sized.jpg Why just the sink? Make The whole counter a cutting board!

12 Inch C-Dory 22 Ship Model

http://www.themarineconnection.net/Accessories.html The Marine Connection Liquidators Fort Pierce 2970 North US Hwy #1, FL 34946 Hours: Tuesday - Saturday 8 a.m. to 5 p.m PHONE: 772-465-6460 FAX: 772-466-3289 EMAIL: themarineconnection@comcast.net WEBSITE...

http://www.c-brats.com/modules.php?full ... _photo.php Yes! Do It, no problem at night. Much cooler and improves privacy too! http://www.c-brats.com/modules.php?full ... _photo.php Notice the truck tint is the same.

I know that outboard oil is different from regular oil due to the anti-corrosive additives in it. Makes sense to use if your outboard is in the salt all the time. West Marine outboard oil should be totally fine to use in your Honda, along with any other brand outboard oils. My next oil change...

SOOOOOO Jealous C-Whisper! Your 70’s are beautiful, and I bet they are quite too. Yamaha would be my first choice if I was powering with a single engine. I was looking at that set up for my 22 Cruiser but it won’t work for me. 80 hp. fully loaded for a 10-day camping trip is plenty of power. I...

My boat has the 1998 Honda twin BF40 set up like your boat did. Tenacious C question; Do you notice that your new Tohatsu twins make less noise than your old Hondas? I was chatting with a Sea-Tow boat Captain the other day. His company repowered a fleet of six boats with all Tohatsu...

Instead of an “I” shape with the foam. Simply radius the corners of your foam stringers to make a “D” shape. Epoxy the foam shape to the overhead use masking tape (green color is the best for this job). The more rounded the “D” shaped foam, the stronger the carbon fiber will act like an “I” beam...

My boat is a 1998 22’ Cruiser. I bought it with the Mach Air installed. It has zero reinforcement under it with a nice bow in the roof maybe about an inch of drop. I am not even concerned about that. When I replace it, I may add reinforcement depending on the A/C. I did notice that it is good to...

Our 1998 22' Cruiser has a motor plate at the helm station of 100 max hp.

Our boat has the twin Honda 40hp carbureted (1998) engines. They’re making oil, leaking oil, knocking, rusting apart, but start every time. Were going to repower the boat this year and planning on replacing them with new Honda 40s or Yamaha 40s. I thought about upgrading to the Honda 50s for the...

Hello Jason, We bought our C-Dory 1998 Cruiser almost a year ago. We pull it with a 2018 Toyota Tacoma (V6 engine). I really think it will depend on the trailer set up with breaks, number of axels, and how far you plan to tow it. (for the whole rig) We had a duel axel aluminum trailer with...