I last posted about two years ago, and peeking in once again. The last two years have been a pretty wild ride!
I've inherited a 22-cruiser and still haven't really decided what I'm going to do with it. I believe it's a '91. Since my dad had severe lewy-body dementia the last few years of his life and the boat was actually something that triggered the "rage" side of the dementia, I have very little passed down knowledge of the boat. I'm going to take things one step at a time. I don't know what I don't know at this point. The boat was sitting on the trailer on the RV pad at my dad's house in Carson City for around 8 years. It had a cover on it, but the cover was badly worn and has since been replaced. The Yamaha 90 only has about 50 hours on it! But like I said it's been sitting for years. I live in the Sacramento area and finally trailered the boat down about a month ago. It's currently in the shop getting the outboard worked on.
I see some marks on the map here tied to people in the Sacramento area - anybody particularly active? I wouldn't mind having someone local with same or similar boat who can help fill in some of the gaps in my knowledge.
Also, general question - the electronics is OLD. Like CRT old. Like Loran-C old. All of the electronics was pulled out of the boat prior to its 8+ year hibernation, and I'm not so sure I see the point in putting it back - but I've got a brother in law telling me I'd be stupid to buy new electronics if I'm going to sell the boat because I won't get my money back and everyone has their own preference in electronics, etc. His point does make some sense and I'm not dismissing it - but I'm sure there are many different opinions in this area as well.
I'm not so sure I want to take it out without ANY electronics...? As far as I can tell so far, dad had a thru-hull transducer and he pulled that out - I have an old and a brand-new transducer sitting in boxes. I believe the hole for the old transducer has been patched - or at least I haven't found the hole yet. Based on discussion here, I'm thinking of going with a transom mount anyway. IDK. I'm just mainly brainstorming at the moment.
Thoughts would be appreciated re: electronics especially as well as please chime in if you're in the Sacramento area and wouldn't mind showing off your C-Dory (22 cruiser, ideally, but anything similar) and getting some coffee or lunch or something.
I've never owned a boat, so it's a bit overwhelming... but one step at a time.
- Gary
I've inherited a 22-cruiser and still haven't really decided what I'm going to do with it. I believe it's a '91. Since my dad had severe lewy-body dementia the last few years of his life and the boat was actually something that triggered the "rage" side of the dementia, I have very little passed down knowledge of the boat. I'm going to take things one step at a time. I don't know what I don't know at this point. The boat was sitting on the trailer on the RV pad at my dad's house in Carson City for around 8 years. It had a cover on it, but the cover was badly worn and has since been replaced. The Yamaha 90 only has about 50 hours on it! But like I said it's been sitting for years. I live in the Sacramento area and finally trailered the boat down about a month ago. It's currently in the shop getting the outboard worked on.
I see some marks on the map here tied to people in the Sacramento area - anybody particularly active? I wouldn't mind having someone local with same or similar boat who can help fill in some of the gaps in my knowledge.
Also, general question - the electronics is OLD. Like CRT old. Like Loran-C old. All of the electronics was pulled out of the boat prior to its 8+ year hibernation, and I'm not so sure I see the point in putting it back - but I've got a brother in law telling me I'd be stupid to buy new electronics if I'm going to sell the boat because I won't get my money back and everyone has their own preference in electronics, etc. His point does make some sense and I'm not dismissing it - but I'm sure there are many different opinions in this area as well.
I'm not so sure I want to take it out without ANY electronics...? As far as I can tell so far, dad had a thru-hull transducer and he pulled that out - I have an old and a brand-new transducer sitting in boxes. I believe the hole for the old transducer has been patched - or at least I haven't found the hole yet. Based on discussion here, I'm thinking of going with a transom mount anyway. IDK. I'm just mainly brainstorming at the moment.
Thoughts would be appreciated re: electronics especially as well as please chime in if you're in the Sacramento area and wouldn't mind showing off your C-Dory (22 cruiser, ideally, but anything similar) and getting some coffee or lunch or something.
I've never owned a boat, so it's a bit overwhelming... but one step at a time.
- Gary