Are All Anchor Rodes Created Equal?

M

MOOSE

Member
Joined
Nov 7, 2003
Messages
624
Reaction score
1
C Dory Year
2001
C Dory Model
22 Cruiser
Hull Identification Number
CD022963D101
Vessel Name
MOOSE
If Plastimo rodes are on the wet-noodle end of things and WM's New England braid are stiffer than a wedge, what do most of you prefer as the optimum? Despite a new windlass, I may ultimately have to forgo the hard-finished New England rode and I'd like some other recommendations. Like, how does the Simpson-Lawrence stack up?
TX
Al
 
I would spend the extra hundred bucks and get the S/L brand over the Plastimo. But first I have to get tired enough the kinky Plastimo, and then come up with the $230.

I had S/L brand on the TyBoo22, and never once touched the rode or had any rope related problems. I have Plastimo on the TyBoo25, and it has it's problems every use.

If you can make the tapered back splice to the chain yourself, you might save a few bucks buying the rope and chain separate. But then you might not be sure how the rope will work.
 
Can we plug a cheaper source for S/L rodes? I just ordered mine here for under $200. 300/15 ft combo.
 
Sneaks":275uavu8 said:
Can we plug a cheaper source for S/L rodes? I just ordered mine here for under $200. 300/15 ft combo.
Click to expand...

By all means! Thanks.

The one I bought a couple years back was the S/L 300/15. I got it through a local marine store, and with the shipping charge it was $237.
 
Good morning to all Brats:
The S/L windlass is a good product and having owned one for a couple of years now our only advice if you should decide to purchase one is to get the 500 because it comes with a metal gypsy. We wore out our plastic gypsys and an upgrade to metal costs $185.(We have a 400). The other nice feature is that the motor is below deck which gives you a nice low profile on top.
 
Good points, all. Specifically, how does the S/L compare to WM's New England rode in terms of stiffness? The same, or slightly more pliable?
Al
 
Back
Top