Bf 90 Anchor

[Wallkerbay]

I took the eboat out to day. The Chesapeak Bay was very rough. Waves at 5-to 10 seconds. I have trided everything that i was told to do. I am useing U.S.a fuel treatment.The engine runs fine at idle. But at 2500-3200 rpm. It runs very rough like the motor is starving for fuel.Thats the rpm I neede.. I just had the carbs rebuilt at 80 hours. Now it has 110.After 3200, it runs great. any help before it becomes a very expensive anchor ?I will not buy any othor HONDA MOTOR PRDUCT<EVER> :x :x :evil:

 

[tsturm]

I took the eboat out to day. The Chesapeak Bay was very rough. Waves at 5-to 10 seconds. I have trided everything that i was told to do. I am useing U.S.a fuel treatment.The engine runs fine at idle. But at 2500-3200 rpm. It runs very rough like the motor is starving for fuel.Thats the rpm I neede.. I just had the carbs rebuilt at 80 hours. Now it has 110.After 3200, it runs great. any help before it becomes a very expensive anchor ?I will not buy any othor HONDA MOTOR PRDUCT<EVER> :x :x :evil:

Try new fuel line / hose from the tank or valve to the motor. I had a similar problem with the fuel pump on a 1998 BF-90 sucking the fuel line closed (starving the motor for fuel) at anything above 1800rpm :wink: