Boat lift bunk spacing for C Dory 22

[island park]

Can anyone please give me the measurement for the spacing of the bunks on a lift for the CD 22 hull. I have found information here about lifts but what I am looking for is the center to center or outside to outside dimension to set the bunks at to support my boat. I am very excited about getting the boat I just bought today into the water, but I need to get the bunks set on my lift first. Thank you for any help. Paul

 

[Captains Cat]

Paul, I don't think it's a critical measurement. Take a look at the picture here



A 22 has a pretty flat bottom. The two things in the middle of the supports are my twin Honda 45's. I'd say as wide as possible without getting near the chines and then place your positioning poles (or whatever they're called to ensure you get it as close to centered as possible. May take a few adjustments but that's not too hard if you have a lift like this one. For the TC255 that came after this one, I just moved these to the center to fit in the tunnel and put flat planks down on the lift bars to support the twin hulls.

 

[island park]

Thanks for your help I will try to duplicate your spacing as it appears and give it a try soon.

Paul