Burnewinn Table and Bar attached to rear motor well for CD22

J

Jeff_e_d

New member
Joined
Jul 27, 2006
Messages
46
Reaction score
0
C Dory Year
1998
C Dory Model
22 Cruiser
Vessel Name
Miss Mirth
My next upgrade for my 22 Cruiser will be to add the burnewinn cutting board / bar to the rear of my boat. Does anyone have the correct part numbers so I could order it myself?

thank you,

Jeff Day
 
They might have it on their website.

https://burnewiin.com/collections/tables-cutting-boards

They also have rail mount parts if you're going to fabricate a rail across the transom above the fuel tanks.

Harbor Marine has parts on sale from their appearance at the Seattle Boat Show.

Good luck and please post progress and final pictures and parts you used.
 
Jeff, I don't know if you have already been able to get your table mounted yet or what you have in the stern for railing or room for mounts. We used two Burnewinn rail mounts + table mounts and the large table between our boarding railings on the stern, the table has been very useful and we can still get under it or around it when needed. There are some pictures in our album.
 
I've got some updates to my boat that I am excited about including the burnewiin table. Should have pictures in a week or so
 
Oh goody!
 
I put a few pics under my album for Miss Mirty, Boat Improvements[/quote]
 
Those are improvements that will make fishing so much more efficient!

Looks like the Burnewiin table can mount over the splashwell, too.
 
Yes (SF), that was my original purpose for the custom bar to put the table in the back. But I really like the flexibility to move it to the side.
 
Back
Top