C-Dory home

bburgin

New member
Just got the 22 home from North Carolina,driving in the snow was no fun,but made the Wife happy with the new toy.Thanks to the guy I bought it from he was a big help,let me stay at his house.
 
towing in the snow, sound like fun. I have done it several times over the years. In the Sierras I towed my 16 star craft TO the snow. loved fishing the high lakes in the winter when the big browns and rainbows are hitting surface plugs. people would give me strange looks as I chained up the truck and trailer and head up the hill into 3 ft of snow for one of the lakes. nice part is that you always find a parking spot.
 
Congrats on making a good choice and a safe trip. As you go, you will find the Brats are like that. You didn't just get a boat, you joined a family. Goes along with the rule, "Just be nice" . Most folk here don't even need that :wink

Harvey
SleepyC :moon

PLI_and_SB_CBGT_2_433.thumb.jpg
 
I towed the Tom Cat over Dead Man's Pass (by Pendleton) on our way back from Florida in March/April. The microclimate at the summit did not disappoint. High pucker factor going downhill, for sure!

:xseek :xseek :xseek

Warren
 
I have the 22 cruiser wondering what kind of windless works best?Horizontal or Vertical?And what brand,I am sure someone could tell me the best one for this boat.

Thanks
 
I prefer the look of the deck mounted vertical windlass with the motor below deck. You do have to cut a bigger hole to mount but not much bigger. No matter what brand you get insure that the motor is horizontal and not vertical under the deck. I think, after rebuilding a few, that the vertical motors are more prone to water. In fact the three that I rebuilt where all lewmars. I believe that lewmar changed to the motors being mounted horizontally
 
bburgin,

The horizontal windlass IMHO is the way to go. Too many of us here have had the dreaded water leak into the gearcase disaster with the vertical. Freezes them right up. The Lewmar works fine with 1/4" chain and 1/2" rope rode. 50-75' of chain works wonderfully.

Here it is
 
I agree that the vertical looks the best, but that the horizontal is more foolproof and saves wasting space and interfering with rode locker access under deck in the v-berth.

I have a Vertical Quick Aires with a horizontal motor below deck, and while I don't use the v-berth for sleeping, it does take up space.

The vertical windlass with a horizontal motor is a better system because it has a better seal, and the motor can be mounted horizontal because a worm gear drive is utilized, which can develop greater mechanical advantage.

Moose and I had problems at first with that windlass because the pressure finger (called the Fleming) wasn't strong enough to pass the chain/rope splice, so I developed a splice with a smaller diameter.

There are a myriad of manufacturers and models. I'd stick with something that others that I trust say works in the boat you have. It's a lot less trouble that striking out on your own.

Getting the windlass, rode, anchor, and anchor roller to work together to self-launch the anchor can be an engineering task that takes a considerable amount of time to work out! Each combination is unique.

You need the self-launching feature to take full advantage of the windlass's possibilities. It allows you to safely launch and retrieve the anchor without going up on the deck in hazardous seas, and is one of the most useful advantages of windlass ownership!

P.S.: An alternative is to have a husky 15-20 some year old male offspring that you can convince needs the anchoring/retrieving exercise as part of his football conditioning! (as per B~C). However, the food bill for same may be more expensive than the windlass. Not to mention the other risks and commitments.

Joe. :teeth :thup
 
Now that the boat is almost finished with the buffing and waxing,all the oxidating came off looks bran new! Time now for pressure water system,shore power,bimini top and windless,have most the parts just need to get busy. We will leave in June for a three week cruise!
 
Back
Top