Canvas

Oops the energy stored in a gallon of gas is 33kWh . I put a comma in instead of a period. The other numbers are ok
 
Well, adding to the canvas thread, I'm in Rhode Island and got my first price estimate for a 3-bow standalone bimini + connector, sides and screens. A well-made but otherwise standard camper canvas (all I gave was the C-Dory line drawings for cockpit size estimates and a photo of a Brat's boat with enclosure as example, and saying it'd go up from the roof and open there)... $10,000!.... Excluding the frame!!! And it wouldn't be until mid-summer or later. Man...
 
Second call..... $10,000 !! This one at least included the frame (7/8" stainless, 3-bow) and thinks he could start working on it in May. He said a 2-bow would work if we stop at the splashwell, but if we go over the lazarettes then the 3-bow is the way to go. He surprisingly did one many years ago for another C-Dory, which found its way to Florida.

Man.... x2
 
DaveInRI said:
Well, adding to the canvas thread, I'm in Rhode Island and got my first price estimate for a 3-bow standalone bimini + connector, sides and screens. A well-made but otherwise standard camper canvas (all I gave was the C-Dory line drawings for cockpit size estimates and a photo of a Brat's boat with enclosure as example, and saying it'd go up from the roof and open there)... $10,000!.... Excluding the frame!!! And it wouldn't be until mid-summer or later. Man...
Click to expand...
That's rediculous if you meant to include 4 zeros. When I had mine built for my 25, about 5 years ago, with three bows, it was about $1,000. One less zero. And was made out of Sunbrella. Of course that was just the bimini, no sides or back. I had one done for my 22 about 14 years ago,and that did include the sides and back. And I think that was $700 at the time. There is a guy near Madison, in Cottage Grove, that does great work and is known around here for doing boat covers and biminis. (He also does tents.) Colby
 
colbysmith said:
That's rediculous if you meant to include 4 zeros. When I had mine built for my 25, about 5 years ago, with three bows, it was about $1,000. One less zero. And was made out of Sunbrella. Of course that was just the bimini, no sides or back. I had one done for my 22 about 14 years ago,and that did include the sides and back. And I think that was $700 at the time. There is a guy near Madison, in Cottage Grove, that does great work and is known around here for doing boat covers and biminis. (He also does tents.) Colby
Click to expand...
Ten thousand. And I didn't even spec anything, that was just me trying to convey to them what it would look like so they'd know whether they could do it by summer or not. The "with the frame" guy said his list is starting in May, so it wasn't like some of the other guys who I saw were 9-24 months booked out for some stuff. It's my fault for living near Newport RI I suppose... Ten! One without the frame! lol speechless. (My boat is 21 years old, too)

And whenever I think "do it yourself" I think of these time charts plus materials and start losing those thoughts:
www.sailrite.com

Time Estimates for Popular Marine Projects

New to canvaswork? Estimate how long it will take you to complete our most popular projects using Sailrite's time estimates.
www.sailrite.com www.sailrite.com
 
Last edited:
That is why DIY for less than $1,000 is the way I went to a already purchased frame and bimini--although making the Bimini is not that hard but the Bimini kit will be in the $1000 range. The material is like the fabric that inflatables are made of, and has a dacron scrim. vinyl coated. So the whole thing would be about $2000. The tarp like "ShelterRite" is $24 a running yard, 61" wide. The Clear vinly comes in various grades from 20 oz Plastipane which is $10 a running yard 54" wide, to Some of the Stratoglass 60 oz high quality at several hundred dollars per 54" x 110 " piece. (Smaller windows anyone?). Three to four panels will do a C Dory cockpit camper canvas. Also is Phifertex® which John Highsmith has mentioned that he likes or you can make up insect screens--I have made these using military surplus "no See em" screen for tents, which you cut, trim with vinyl and then put up with comon sense fittings. To get away from zippers, I use snaps or Lift the dot, comon sense fasteners. The moderately priced snap setting tool works fine, and I have had mine for many years, with many projects, used with a pair of flat jawed Vise Grips, plus a hammer struck punch, punch block, and various gromet and rivet sets. You don't have to buy the $500 tools to set snaps and various fasteners. The fasteners can be used instead of sewing zippers. The Phifertex® comes in Standard for $17 a running yard, or the Phifertex® plus for $25 a running yard. I use HL 66 vinyl glue--not expensive, and sets up fast. The material will pull apart before the glue gives--stronger than sewing.

Bimini kits are $800 to $990 for 3 to 4 bows 316 SS in 7/8" to 1" tube diameter. The kits come with various grades and types of fabric. You can sew these with any domestic sewing maching--using SailRite needles and threads.

If anyone is interested I will walk them through how to make the Bimini top, and full camper back
 
Sailrite has detailed videos on how to make a bimini.
 
Hi Donald,

In my album I have a couple pictures of the cockpit top, and sides installed.

Bentleys in Oregon City built them for C-Dory years ago.

Fits like a glove.
 
DaveInRI said:
Second call..... $10,000 !! This one at least included the frame (7/8" stainless, 3-bow) and thinks he could start working on it in May. He said a 2-bow would work if we stop at the splashwell, but if we go over the lazarettes then the 3-bow is the way to go. He surprisingly did one many years ago for another C-Dory, which found its way to Florida.

Man.... x2
Click to expand...
Third unofficial estimate, this one $7500-9500, and about 40 min away/inland.

My father kept a boat a little south of Boston and sold it four years ago. He said one of his clear side windows fell off the dock and the local canvas shop wanted $800 to make one! He paid a diver $50 to go fish it up from the bottom, ha.

I think there's a good business opportunity here: boat canvas arbitrage. Open a "canvas shop" (quotes intentional), say you need to keep the boat for a couple weeks, charge $10k (+), trailer the boat to an actual canvas shop far away, pay $6000 for theirs, pay for your fuel & lodging with the $4k profit. Warranty claims go through original shop, you ship as intermediary.

Jokes aside, I did find one local place (waiting to hear back) who might have an unfair advantage and I'm hoping it will translate into price. They use the template machines countertop installers now use, where you basically have a stylus on a retractable string, and bring it out to various points, then back to the device (lunchbox size) between points. It then creates a digital template that converts into a cad model for cutting a template etc.. I found this a neat opportunity for that technology and was glad to see it. Is it as good as tyvek or cardboard etc? In the rights hands, maybe, maybe not...

www.prodim-systems.com

BC Marine Canvas: "The Proliner has reduced the time spent in the field patterning jobs, and has allowed us to take on large-scale projects!"

Lee Brayton: "The Proliner was the best investment we have made for our company!"
www.prodim-systems.com www.prodim-systems.com
 
Last edited:
Hi Dave,

I would at least reach out to Bentleys in Oregon, OR. They may be able to point you to a canvas shop on the East Coast who might have the patterns for your boat. Mine is a three bow top and it is an awesome addition to the Cruiser. (503) 659-0238
 
I use plain old brown paper for templates for canvas work. Cheap and easy to modify. For fiberglass or carpentry, I use "Tic" boards. Usually cardboard, and tape tongue bades or split pices off gallon paint stirring sticks. You can cut carboard templets if necessary, Or draw lines on wood or fibergass pannel skipping the templet part.
 
Back
Top