Overall length of c-dory and trailer?

Alot more than 22 feet! I am building a C shed. From prop to tounge is about 28 ft. That makes for a 30 foot building! It will be a fun project.
 
flapbreaker":qr06ehy2 said:
Just wondering what the overall length of a 22' cruiser with motors and trailer? I'm guessing 30'?
Click to expand...

That's a good conservative number to go with. There will be a little variation with trailers and motors, and you can save almost 2 feet by lowering the outboard. Also, if space is really at a premium, you can get a swing tongue on many trailers.

With a single Honda 90 in the raised position, on a tandem Pacific trailer, I'm right around 29' from end to end.
 
My C-22 with a 75F Yamaha engine had to fit in a 26 ft. long space. I ordered a Pacific tandem trailer with the swing tongue and with the tongue out of the way, it will fit the space with about 6-8" to spare if the engine is up. I always back over the curb, then lower the engine and back in to the "mark" on the driveway where the front tire should sit because forgetting to follow procedure would easily result in an unwanted vent hole in the garage wall if I'm not very careful.


Don
 
Back
Top