I recently installed version 4.29 of the Raymarine Software on my E-80. A few days later, I had the occasion to turn on my Radar. No luck! The screen froze up and the Radar did not transmit. An e-mail to Raymarine resulted in the following message;
"You need to master reset the displays to return the radar to normal operation.
First save your waypoint and routes to a CF card. With the unit off press and hold in the first softkey in while you power up the unit. Continue to hold in the key until the reset is complete."
Hope this saves you Raymarine owners a little time and frustration.
"You need to master reset the displays to return the radar to normal operation.
First save your waypoint and routes to a CF card. With the unit off press and hold in the first softkey in while you power up the unit. Continue to hold in the key until the reset is complete."
Hope this saves you Raymarine owners a little time and frustration.