sean92056
New member
- Joined
- Aug 8, 2022
- Messages
- 12
- Reaction score
- 0
- C Dory Year
- 2007
- C Dory Model
- 255 Tomcat
- Vessel Name
- NautiCat
I have a 2007 tomcat. I replaced one of the bilge pumps a couple of years ago and all seemed fine. However, we had a big storm a week or so ago, and I came down to check on the boat. It's always my habit to manually hit the bilge pumps just to see if there's any water. To my surprise, there was quite a bit of water that must've seeped in through the fish boxes, but never was pumped out by the bilge pumps. Long story short I went through all the wiring and connections in the battery compartment and followed every lead I could figure and I still can't figure out why I don't get 12 V power for the automatic side of each bilge pump. Again, they work on the manual side. Is there some other place or fuse that I need to look for? Based on the fact that they're both not getting power to the automatic side I'm figuring it has to be some kind of common connection or fuse.
I exhausted everything ChatGPT recommended so I'm coming here
I exhausted everything ChatGPT recommended so I'm coming here
