Latest activity

What's new Featured content New posts New media New media comments New resources New profile posts Latest activity
  • W
    Wood Zeppelin replied to the thread Charging Dual Batteries.
    Yes, this raises the question, how/when does a charger know to stop charging. Does it just read the battery voltage and use that...
  • T
    thataway replied to the thread Refrigerator.
    "While headlines sound dramatic, this is not a shutdown — it’s a corporate restructuring within the same Thetford family. The filing...
  • W
    Wood Zeppelin reacted to Foggy's post in the thread Charging Dual Batteries with Like Like.
    My understanding: If the 2 batteries are identical except for a (small ?) voltage difference and are connected properly in parallel, the...
  • K
    Karl Konecny replied to the thread Tabbing or gel cote peeling?.
    My 22' of similar age (2008) had a similar problem on the interior. I peeled off the loose stuff and painted over the exposed...
  • P
    pcg posted a comment on the media item Hightop 12.
    I decided that while I had the roof in the shop I would go ahead and prime it for painting later. I did final sanding with 320 grit...
  • P
    pcg posted a comment on the media item Hightop 11.
    Done. Well, except for sanding and fairing. The new sections consist of two layers of 1708 with additional layers at the edges and...
  • P
    pcg posted a comment on the media item Hightop 10.
    Masonite forms in place for laying up the corner gaps.
  • P
    pcg posted a comment on the media item Hightop 9.
    Front section has been laid up.
  • P
    pcg posted a comment on the media item Hightop 8.
    Front section has been laid up.
  • P
    pcg posted a comment on the media item Hightop 7.
    I used 1/8" smooth masonite to make a curved form to close the front of the roof.
  • P
    pcg posted a comment on the media item Hightop 6.
    I built a wooden cradle to hold the roof off my work table so I could work on it without distorting its shape.
  • P
    pcg posted a comment on the media item Hightop 5.
    Once the walls had been extended I reinstalled the roof top.
  • P
    pcg posted a comment on the media item Hightop 3.
    Once in my shop I cut the top of the roof off.
  • P
    pcg posted a comment on the media item Hightop 2.
    Done! Scary that this only took two minutes! Not enough time to change my mind...
  • P
    pcg posted a comment on the media item Hightop 1.
    I decided the best course of action for converting to a high top was to remove the roof and then do the modifications in my heated shop...
Show older items
Back
Top