oversized hole drilled in deck

oversized hole drilled in deck

  • Media owner thataway
  • Date added Jun 4, 2007
  • Reaction score 0
  • Comments 0
undercut and edges of hole filled with epoxy filler

undercut and edges of hole filled with epoxy filler

  • Media owner thataway
  • Date added Jun 4, 2007
  • Reaction score 0
  • Comments 0
Dremel sander under cutting balsa

Dremel sander under cutting balsa

  • Media owner thataway
  • Date added Jun 4, 2007
  • Reaction score 0
  • Comments 0
drilled a hole in deck of pearson 30 balsa core--undercut with dremel sander

drilled a hole in deck of pearson 30 balsa core--undercut with dremel sander

  • Media owner thataway
  • Date added Jun 4, 2007
  • Reaction score 0
  • Comments 0
finel fillet from side

finel fillet from side

  • Media owner thataway
  • Date added Jun 4, 2007
  • Reaction score 0
  • Comments 0
final fillet

final fillet

  • Media owner thataway
  • Date added Jun 4, 2007
  • Reaction score 0
  • Comments 0
Fillet created with spreader tool

Fillet created with spreader tool

  • Media owner thataway
  • Date added Jun 4, 2007
  • Reaction score 0
  • Comments 0
filler in area where fillet will be formed

filler in area where fillet will be formed

  • Media owner thataway
  • Date added Jun 4, 2007
  • Reaction score 0
  • Comments 0
Mixed to peanut butter consistancy ready to spread

Mixed to peanut butter consistancy ready to spread

  • Media owner thataway
  • Date added Jun 4, 2007
  • Reaction score 0
  • Comments 0
Cabosil thickened and addition of microlite filler

Cabosil thickened and addition of microlite filler

  • Media owner thataway
  • Date added Jun 4, 2007
  • Reaction score 0
  • Comments 0
adding cabosil by the Pinch

adding cabosil by the Pinch

  • Media owner thataway
  • Date added Jun 4, 2007
  • Reaction score 0
  • Comments 0
epoxy and hardner mixed in cup

epoxy and hardner mixed in cup

  • Media owner thataway
  • Date added Jun 4, 2007
  • Reaction score 0
  • Comments 0
fillers: cabosil, microlite and microfibers

fillers: cabosil, microlite and microfibers

  • Media owner thataway
  • Date added Jun 4, 2007
  • Reaction score 0
  • Comments 0
West systems epoxy and hardner

West systems epoxy and hardner

  • Media owner thataway
  • Date added Jun 4, 2007
  • Reaction score 0
  • Comments 0
fast set epoxy and screws to make a right angle bracket to hold a fuel pump

fast set epoxy and screws to make a right angle bracket to hold a fuel pump

  • Media owner thataway
  • Date added Jun 4, 2007
  • Reaction score 0
  • Comments 0
Fast set epoxy

Fast set epoxy

  • Media owner thataway
  • Date added Jun 4, 2007
  • Reaction score 0
  • Comments 0
Final layer of epoxy, and 10 oz glass covering the hole, with two layers of 10 oz glass covering and tying the void in the foreward area--all water tight.

Final layer of epoxy, and 10 oz glass covering the hole, with two layers of 10 oz glass covering and tying the void in the foreward area--all water tight.

  • Media owner thataway
  • Date added Jun 3, 2007
  • Reaction score 0
  • Comments 0
a layer of glass fibers and a layer of 10 oz cloth laid over the void with epoxy. A second layer of cloth is placed over this and into the transom opening

a layer of glass fibers and a layer of 10 oz cloth laid over the void with epoxy. A second layer of cloth is placed over this and into the transom opening

  • Media owner thataway
  • Date added Jun 3, 2007
  • Reaction score 0
  • Comments 0
Void from the inside, cleaned out for glass application

Void from the inside, cleaned out for glass application

  • Media owner thataway
  • Date added Jun 3, 2007
  • Reaction score 0
  • Comments 0
Wood sanded clean--notice a small void at the very back, where the aft deck is attatched

Wood sanded clean--notice a small void at the very back, where the aft deck is attatched

  • Media owner thataway
  • Date added Jun 3, 2007
  • Reaction score 0
  • Comments 0
initial photo after the \"flapper\" valve is taken off. There is gel coat smeared over the wood boring, and some voids.

initial photo after the \"flapper\" valve is taken off. There is gel coat smeared over the wood boring, and some voids.

  • Media owner thataway
  • Date added Jun 3, 2007
  • Reaction score 0
  • Comments 0
Foreward part of hatch plywood, with spray of gel coat over the raw edge

Foreward part of hatch plywood, with spray of gel coat over the raw edge

  • Media owner thataway
  • Date added May 30, 2007
  • Reaction score 0
  • Comments 0
Two trim screw holes where water was comming thru the deck from hatch lack of bedding

Two trim screw holes where water was comming thru the deck from hatch lack of bedding

  • Media owner thataway
  • Date added May 30, 2007
  • Reaction score 0
  • Comments 0
Moisture on plwywood both from screw holes and from around the lack of caulking

Moisture on plwywood both from screw holes and from around the lack of caulking

  • Media owner thataway
  • Date added May 30, 2007
  • Reaction score 0
  • Comments 0
T

In driveway

  • Items 628
  • Album owner thataway
  • Date created
There are no comments to display.

Album information

Category
Thataway
Album owner
thataway
Date created
Item count
628
View count
126,115
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

T

thataway

Media items
1,041
Albums
16
Can view media items
Inherited from category
Can add media items
Album owner only

Share this album

Back
Top