Search results

Yes that's the very reason we drive, the wind and current can stop your trip in its wake up their, and I told Pierre I would be up to help then. As I get older I find that there is safety in numbers and another rig coming along would be a lot more fun ! So if you have some time your welcome to...

I will be towing Raven Dancer to Port McNeill. Leaving this Saturday from Vancouver WA. Going to catch the Black Ball out of PA and drive up to Campbell River and spend the night then onto Port McNeill. I need to be in Echo Bay 7/4. Weather permitting. Should be coming back early October. Let...

Kushtaka; I also use the Scotty Electric downrigger's mounted in the same location as yours. I do use stainless wire and adjust the down rigger weight from 7 to 10 to 12 pounds. 7 pounds for lake fishing and 12 pounds for ocean fishing in a heavy rip current, most of the time I just use the 10...

We will be helping out again at Pierres July through September I will keep a eye out for you .

I am wondering which chart plotter app. some of you are using for your Apple iPads and iPhones and if the app will work if the phone is in airplane mode or without any wifi, as we do a lot of boating in Canada where we put our phones in airplane mode. The boat does have a Lowrance chart plotter...

If any of the NW C-Brats are going to be in the San Juan's for the month of August give me a shout or drop me an email. Be fun to meet folks and say hi. Dave Raven Dancer

Thanks Ken it's a deal. I think I sent you a email with my info on it. Thanks Dave

I would like to get some input on the alcohol stove from folks that have used them. (Origo 3000 Alcohol Stove) I have used my Wallace 95D for the past 11 years, and about every 5 years i take it in for service to Scan Marine and pay around $300. Well my fan no longer comes on in the lid and I...

Working on a "What Knot Box" to put on the new table. Made out of leftover Maple, Mahogany, Rosewood, with a small stick of inlay down the middle on the top. A guy hass to have a place to keep his what knots ! Picture is on page 3 of Raven Dancers album, unless Harvey fixes this post and adds...

What Knot Box from leftover material from the table project.

Yes I cut a piece of plexi - glass to fit over the entire surface of the table,Thought of making some crumb corners, but decided not to. It was a long and challenging project that had me practicing my cussing and praying at the same time, like please God let this blankety blank angle fit in...

Thanks for fixing my pictures Harvey. By the way are you going to Friday Harbor ?

Got my new table finished and installed. Couple of pics in Raven Dancers album page 2. One of these days I will figure out how to post a pic in the body of the message. Dave. Raven Dancer.[/img]

Table is finished and installed

I like my mahogany outside corner I made.

Thank you all for the very nice comments. The table and setting the inlay took about 7 weeks and I'm still not finished. It has been a very fun and frustrating project, but I always say if you know what your doing your not learning anything. If I had to make and sell them they would be priced so...

Now that I have retired again I have had some time to make a new table for Raven Dancer. The table is 3/4" maple trimmed in mahogany, the compass rose inlay is 1/8" thick mounted on a piece of 3/8" marine plywood. The Rose is 12" in diameter, and made out of 4 different exotic hardwoods. I'm in...

New Table, Maple with Mahogney Trim

Inlay is 1/8\" thick mounted on a piece of 3/8 marine plywood. It is made of 4 different types of exotic hardwood.

I worked at Pierres at Echo Bay for many years, even before it was Pierres. Everyone here has given you great information. Drop me an email if you need any specific information and I would be glad to throw in my 2 cents worth! Dave Raven Dancer drlaabs@comcast.net