Search results

  1. T

    Converting to Oil Fill Bearings????

    False. The Kodiak kit that I installed 10 years ago has worked perfect. The kit comes with an alu. press fit hub cap with a threaded outer end that a semi clear cap (with "o" ring) screws on to. I went from having to pack bearings every year to checking out of guilt every 2 yrs. Oil bath hubs...
  2. T

    Coast Guard App

    I usually don't have cell service :sad other than that a great Idea!!
  3. T

    8 plait to chain splice

    Nice Job!! :thup
  4. T

    dielectric grease

    Crimp lug to wire, then shrink tube(with the glue lining) then dielectric grease the lug and stud. :thup I coat the terminals at the Batt. with Corrosion X. I clean the terminals out of guilt every 2 yrs, never any green stuff :thup There is a marine electrical store on the E. side of the new...
  5. T

    Leaky Cockpit Hatches in C-Dory 25' Cruiser

    :thup :thup :thup :thup :thup
  6. T

    Drippy Cave Syndrome

    Any Boat period. :thup
  7. T

    dinghy weight

    How are you going to get it up on the roof? 40 years ago I probably would not have thought twice of throwing 115lbs up there but them days are long gone! The boat will be just fine with the weight. :mrgreen: So to answer your question, YES :thup
  8. T

    Accessing Transom Drain Plug While On Lifter

    :thup :thup :thup :thup :thup :thup
  9. T

    Did I Screw Up? And How Do I Fix It?

    Probably overfilled it, crack the fill plug slowly with something to catch the extra & try to turn the wheel. Like what DR Bob said. Or less messy in the cabin crack each bleeder at the cylinder, see if you get a squirt of oil at either, put a piece of clear tubing between them & turn the wheel...
  10. T

    Leaf spring help needed

    That shippingX5 is our Alaska Discount! Ez loader probably has Pohl Spring (I90&Sprague overpass) make them :wink: :lol: :thup
  11. T

    Anchor locker drain leaking into v berth

    Exactly what I did on my 2003 :thup :thup :thup
  12. T

    Deep cleaning the head and holding tank

    Don't use bleach, it will eat the impeller in the macerator pump. :thup
  13. T

    Wallas 95d

    SCAN MARINE EQUIPMENT 2144 Westlake Ave N, Ste. D Seattle, WA 98109 ph: 888-606-6665 | fx: 206-285-9532 CONTACT US | SALES | SERVICE
  14. T

    Wallas 95d

    Call scan marine? They will answer all your questions. :thup
  15. T

    Plane with a Brain

    :thup :thup
  16. T

    Dock line chafe and gelcoat rubbing on TomCat

    Drill, epoxy, 5200, put whatever you want where ever you want :wink: I have hand poor luck with the cure all Butyl tape sealing anything so I always use the tried & true 5200 :thup Look in my album I put on some line chalks? to cure the same problem :wink: Good luck & have fun.
  17. T

    Upgrades to Zenith in 2020

    Nice!! :thup
  18. T

    Wallas stove run time

    Just remember the paraffin drops out of #2 at 32 deg. F(gelling) so be careful when you buy fuel at the pump as it gets colder they will mix #1 & #2 to keep from gelling. In the next couple weeks it will be all #1 at the pumps anyway :wink: :thup
  19. T

    Wallas stove run time

    My Wallas on high will use 1 gal every 24 hrs run time. The Planar furnace uses about the same :thup Before I put in the Planar, the stove & blower ran 24 hrs lots of times. JetA at your favorite airport is far cheaper than pump #1 diesel & with "Kleen Heat" @ $12.00 a gallon I won't buy it any...
  20. T

    Thanks for the add

    Welcome! Avoid the 2-3 footitis & get a 25 :lol: any/all of them are great boats :thup
View older results
Back
Top