Transom Saver

T

Tug

Active member
Joined
Jun 22, 2007
Messages
1,003
Reaction score
6
C Dory Year
1985
C Dory Model
22 Angler
Hull Identification Number
DOR22241H585
Vessel Name
Drifter
Found this new type of transom saver made by: www.motormateusa.com
Ideal for anyone who trailers a boat short or long distances. See their video. Tug
 
Apparently does not work on Hondas.

We have been using the transom saver which attaches the lower unit to the trailer frame, with a heavy spring loaded arm on the Caracal for 3 years. This is the typical "transom saver". This tends to take more load off the transom, than the type pictured or the rubber over the center hydraulic cylinder (which we are using on the C Dory 22).

However this is also a good idea--
 
Be very careful with those. If you have power trim/tilt, the hard rubber kind that fits over the TT piston rod is VERY hard and can crush the top of your TT reservoir if you forget it's there and power the engine down. Don't ask me how I know. :shock: :cry: :oops:

Charlie
 
Yeah Charlie gave me the hard rubber "transom saver"--but warned me--put a red tag on the trim!
 
I think I would stick to the trailer mounted transom saver. That doesnt look like it would take any load off of the transom as it attaches to the motor on both ends.
 
Back
Top