Media added by pcg

Navigation

    1. @C 61
    2. Coho 154
    3. pcg 122
      1. Mods 132

Browse albums
water tank hoses

water tank hoses

  • Media owner pcg
  • Date added Nov 23, 2024
  • Reaction score 0
  • Comments 0
Masonite forms in place for laying up the corner gaps.

Masonite forms in place for laying up the corner gaps.

  • Media owner pcg
  • Date added Apr 28, 2024
  • Reaction score 0
  • Comments 0
Still have a gap on each side to fill in.

Still have a gap on each side to fill in.

  • Media owner pcg
  • Date added Apr 28, 2024
  • Reaction score 0
  • Comments 0
Front section has been laid up.

Front section has been laid up.

  • Media owner pcg
  • Date added Apr 28, 2024
  • Reaction score 0
  • Comments 0
I used 1/8" smooth masonite to make a curved form section to close the front of the roof.

I used 1/8" smooth masonite to make a curved form section to close the front of the roof.

  • Media owner pcg
  • Date added Apr 28, 2024
  • Reaction score 0
  • Comments 0
Then I reinstalled the roof top.

Then I reinstalled the roof top.

  • Media owner pcg
  • Date added Apr 28, 2024
  • Reaction score 0
  • Comments 0
Once in my shop I cut the top of the roof off.

Once in my shop I cut the top of the roof off.

  • Media owner pcg
  • Date added Apr 28, 2024
  • Reaction score 0
  • Comments 0
Done. Scary how quick and easy this was!

Done. Scary how quick and easy this was!

  • Media owner pcg
  • Date added Apr 28, 2024
  • Reaction score 0
  • Comments 0
charger

charger

  • Media owner pcg
  • Date added Apr 25, 2024
  • Reaction score 0
  • Comments 0
One day later I used a multitool to remove most of the excess epoxy.

One day later I used a multitool to remove most of the excess epoxy.

  • Media owner pcg
  • Date added Apr 8, 2024
  • Reaction score 0
  • Comments 0
Epoxy is poured and curing.

Epoxy is poured and curing.

  • Media owner pcg
  • Date added Apr 8, 2024
  • Reaction score 0
  • Comments 0
Here the three molds for the port channel are in place and screwed down to the plywood base.

Here the three molds for the port channel are in place and screwed down to the plywood base.

  • Media owner pcg
  • Date added Apr 8, 2024
  • Reaction score 0
  • Comments 0
Back
Top