Media added by hardee

Navigation

    1. @C 61
    2. Coho 154
    3. pcg 122
      1. Mods 132

Browse albums
New to us, Delta Plow, 14#, purchased with chain and rode from SeaWolf Joe.

New to us, Delta Plow, 14#, purchased with chain and rode from SeaWolf Joe.

  • Media owner hardee
  • Date added Feb 21, 2009
  • Reaction score 0
  • Comments 0
"The bluest skys I've ever seen are in ...." Sequim I'm sure.

"The bluest skys I've ever seen are in ...." Sequim I'm sure.

  • Media owner hardee
  • Date added Feb 21, 2009
  • Reaction score 0
  • Comments 0
Attach the "Y" to the rinse hose first, and then the OB ports.

Attach the "Y" to the rinse hose first, and then the OB ports.

  • Media owner hardee
  • Date added Feb 21, 2009
  • Reaction score 0
  • Comments 0
Nice Yamaha feature, a wash down/engine rinse tap right on the side of the OB block.

Nice Yamaha feature, a wash down/engine rinse tap right on the side of the OB block.

  • Media owner hardee
  • Date added Feb 21, 2009
  • Reaction score 0
  • Comments 0
Attatching the second side of the "Y" for the twins freshwater rinse down.

Attatching the second side of the "Y" for the twins freshwater rinse down.

  • Media owner hardee
  • Date added Feb 21, 2009
  • Reaction score 0
  • Comments 0
Wash-down at John Wayne, after a nice day run.  Sure wish this was available year around.

Wash-down at John Wayne, after a nice day run. Sure wish this was available year around.

  • Media owner hardee
  • Date added Feb 21, 2009
  • Reaction score 0
  • Comments 0
John Wayne dock.  Not just for the beautiful. Lots of the working boats here too.

John Wayne dock. Not just for the beautiful. Lots of the working boats here too.

  • Media owner hardee
  • Date added Feb 21, 2009
  • Reaction score 0
  • Comments 0
Cockpit gunnel gel coat repair.  Fixing the screw holes from the foot plates.

Cockpit gunnel gel coat repair. Fixing the screw holes from the foot plates.

  • Media owner hardee
  • Date added Feb 21, 2009
  • Reaction score 0
  • Comments 0
Blowing out the sanding dust, then wipped with acetone, prior to filling with new gel coat.

Blowing out the sanding dust, then wipped with acetone, prior to filling with new gel coat.

  • Media owner hardee
  • Date added Feb 21, 2009
  • Reaction score 0
  • Comments 0
Grinding out cracks and chips in the Gel Coat from where the SS strip screws did not hold.

Grinding out cracks and chips in the Gel Coat from where the SS strip screws did not hold.

  • Media owner hardee
  • Date added Feb 21, 2009
  • Reaction score 0
  • Comments 0
Sanding next to the non-skid, working down the gel coat scratches.

Sanding next to the non-skid, working down the gel coat scratches.

  • Media owner hardee
  • Date added Feb 21, 2009
  • Reaction score 0
  • Comments 0
Chipped gel coat ground out to smooth edges, cleaned and ready to fill with new gel coat.

Chipped gel coat ground out to smooth edges, cleaned and ready to fill with new gel coat.

  • Media owner hardee
  • Date added Feb 21, 2009
  • Reaction score 0
  • Comments 0
Neighbor Paul, dremeling out the cracked jell coat where the step plate screws broke out.

Neighbor Paul, dremeling out the cracked jell coat where the step plate screws broke out.

  • Media owner hardee
  • Date added Feb 21, 2009
  • Reaction score 0
  • Comments 0
Chipped jel coat on gunnel, from movement on SS step plate, working screw loose.

Chipped jel coat on gunnel, from movement on SS step plate, working screw loose.

  • Media owner hardee
  • Date added Feb 21, 2009
  • Reaction score 0
  • Comments 0
At the SBS-08CBGT.  Thanks Ruth.

At the SBS-08CBGT. Thanks Ruth.

  • Media owner hardee
  • Date added Feb 21, 2009
  • Reaction score 0
  • Comments 0
Back
Top